Coupler Products Catalog for technical info.

Drawbars come in many styles, capacities, mounting and cushioning options.

RIGID MOUNT WELD-ON

These drawbars are available in two types:

1. DB-010EJ1, which welds onto the tongue, and
2. DB-1400, which slides over the tongue first and is then welded

RIGID MOUNT WELD-ON WITH AIR CUSHION

This drawbar type utilizes an air chamber connected to a plunger pad to remove the slack between the pintle horn and drawbar. Air-cushioned drawbars are typically used on A-frame-type tongues where an air-cushioned pintle hook is not feasible.

RIGID MOUNT BOLT-ON (PLATE MOUNT)

These drawbars are available in two configurations:

1. Rectangular shank (DB-1228-1)
2. Square mounting base (DB-060FQ1)

RIGID MOUNT BOLT-ON (SHANK MOUNT)

This type of drawbar uses a large shank and nut to develop a clamping force between the drawbar and its mounting surface. This style drawbar cannot be used as a swivel drawbar because the clamping force is needed to develop the rated capacities.

SWIVEL MOUNT WELD-ON

This drawbar style allows the drawbar eye to rotate about an axis parallel with the towing vehicle, providing oscillation relief.

SWIVEL MOUNT WELD-ON WITH RUBBER CUSHION

The drawbar contains an internal rubber cushion to cushion the start-up load and shock.